8
GB
Note
• Do not connect the speaker cords supplied with
the Wireless Surround Speaker Kit to any of the
speaker jacks on your S-AIR main unit.
4
Connect the AC power cords
(mains leads).
Before connecting the AC power cords
(mains leads) of your S-AIR main unit
and the surround amplifier to wall
outlets (mains), make sure that all
speakers are connected.
To use the wireless system, you need to set
up the surround amplifier and your S-AIR
main unit. Before setting, make sure that the
wireless adapters are correctly inserted in
the S-AIR main unit and surround
amplifier(s).
Setting up the S-AIR main
unit
For details on using the S-AIR main unit,
refer to the operating instructions of the
S-AIR main unit.
1
Turn on the S-AIR main unit.
The system turns on.
2
Set [Surround Back] in [Speaker
Settings] of the S-AIR main unit
to [Yes].
3
Set up the S-AIR main unit so it is
ready for ID setting.
4
Select the ID for the S-AIR main
unit.
You can select any ID (A, B, or C).
5
If there is a surround amplifier
included with the S-AIR main
unit, make sure the SURROUND
SELECTOR switch is set to
SURROUND.
Setting Up the Wireless
System
