22
Stopping playback
automatically
(OFF TIMER)
You can set the CD player to stop the play
automatically within a range of 1 to 99
minutes. While the timer function is
working, “
” appears at about 5 second
intervals.*
*Only when Screen 1 or 2 is displayed (page 15)
1
Press and hold DISPLAY/MENU
until the MENU screen appears.
Press
V
or
v
to select “OPTION,”
then press
u
/ENTER.
2
Press
V
or
v
to select “TIMER,”
then press
u
/ENTER to enter the
selection.
3
Press
V
or
v
to select “10 min*,”
then press
u
/ENTER.
* Default setting. If you have changed the
setting, the length of time already set
appears.
4
Press
V
or
v
to select the length
of time you want to set, then press
u
/ENTER to enter the selection.
• To increase/decrease by 5 minutes:
Press
V
or
v
repeatedly.
• To increase/decrease by 1 minute:
Press
V
or
v
for 2 seconds or more.
To return to the previous screen
Press
–.
To cancel the setting operation
Press
x
.
To check the length of time before the
CD player stops playback
During play, perform steps 1 - 3.
To cancel the OFF TIMER function
Perform steps 1 - 3, changing the OFF
TIMER setting to “OFF.”
Locking the controls
(HOLD)
You can lock the controls on your CD player
to prevent accidental button presses.
Slide HOLD in the direction of the
arrow.
“HOLD” flashes if you press any button
when the HOLD function is activated.
To unlock the controls
Slide HOLD in the direction opposite to that
of the arrow.
