16
MZ-NH900
11*
$$$$$$ ##
888
SET OK ##
888
RMC OK ##
Flow of Self-diagnosis Result Display mode operation:
7-2. Error Code of The Self-Diagnosis Result Display
Mode
Error code
Description
00
No error
01
Attempt to access an abnormal address
02
High temperature detected
03
Focus error (no change)
04
Abnormal rotation of disc
05
Fault of disc discriminate
06
Error of access loop (no change)
07
Error of access loop (with change)
08
Could not read address
09
Focus error (with change)
12
Could not read data with SYNC
13
TOC address data error
32
Focus error, ABCD offset error
33
Tracking error, offset error
34
Tracking error, X1 tracking error, offset error
7-3. Clear The Total Recording Time
After replacing the optical pick-up, clear the total recording time.
1. Enter the test mode (Display Check mode).
2. Press the
>
key to activate the Self-Diagnosis Result Display
mode.
3. Press the
[VOL--]
key once to display the total recording time
indication.
4. Press the
X
key and display “ClrOK?”.
5. Press the
X
key again to display “RecT 0” and clear the total
recording time.
8. KEY CHECK MODE
This mode is used for key check.
Operation of The Key Check Mode
1. Enter the test mode (Display Check mode).
2. Press the
[GROUP]
key to activate the Key Check mode where
the LCD displays as shown below.
Display
“
*
”
: Remote commander (0: with, 4: without)
“
$$$$$$
” : Pressed key name.
When remote commander key is pressed, display becomes
as “
r$$$$$
”.
When the jog dial is turned, it displays “
JOG+ X
” or “
JOG-
X
” (“
X
” is number of 1 to 3). If the jog dial is turned four
click, it displays “
JOG+OK
” or “
JOG-OK
”.
“
##
”
: Key voltage of remote commander. (Hexadecimal number)
3. When all keys (*1) check is OK on the main unit, it displays
as follows.
Display
When all keys (*1) check is OK on the remote commander, it
displays as follows.
Display
*1) Turn the jog dial four click clockwise and counterclockwise to
jog test is OK.
4. When all keys check are OK both the main unit and the remote
commander, it display backs to the Display Check mode
automatically.
5. To quit the Key Check mode, open the lid and return to the
Display check mode.
The first error
[VOL +]
key
[VOL --]
key
***
1 ####
The last error
[VOL +]
key
[VOL --]
key
***
N ####
One error before
the last
[VOL +]
key
[VOL --]
key
***
N1####
Two error before
the last
[VOL +]
key
[VOL --]
key
***
N2####
Total recording time
[VOL +]
key
[VOL --]
key
***
R_####
Summary of Contents for Walkman MZ-MH900
Page 22: ...22 MZ NH900 MEMO ...
