NWD-E023F/E025F.GB 3-875-124-11(1)
11
11
HOLD switch
You can protect the player against
accidental operation by using the
HOLD switch when carrying it.
By sliding the HOLD switch to the
direction of the arrow (
), all
operation buttons are disabled. If you
press buttons while the HOLD
function is activated, “HOLD”
appears in the display. If you slide
the HOLD switch to the opposite
position, the HOLD function is
released.
RESET button
Resets the player when you press the
RESET button with a small pin, etc
Strap hole
Used to attach a strap (sold
separately).
Accessory hole
Used to attach the optional
accessories.
USB cap
Remove the USB cap and connect
the USB connector of the player to a
USB port on your computer.
To remove the USB cap
Remove the USB cap as shown
below.
USB connector
Continued
Rear
Table of
Cont
ents
Menu
Inde
x