NW-E013/E015/E016/E013F/E015F/E016F.GB 3-093-019-12(1)
1
1
Getting Started
Preparing the Player
Charging the Player
The player’s battery is recharged while the player is connected to a running
computer.
Remove the USB cap and connect the USB
connector to a USB port on your computer.
When the remaining battery indication of the
display shows:
, charging is completed
(charging time is approx. 60 minutes*
1
).
When you use the player for the first time, or if
you have not used the player for a long time,
recharge it fully (until the
battery indication is displayed).
*
1
This is the approximate charging time when the battery power is low and the “USB Bus
Powered” setting (
page 43) is “High-Power 500mA” under room temperature. The
charging time will vary depending on remaining battery power and battery condition.
If the battery is charged in a low-temperature environment, the charging time will be
longer. It will also be longer if you transfer audio file(s) to the player while charging.
Recharging the player
The battery icon in the display (
page 12) changes as shown below. See
page 82 on battery duration.
The battery power gets low as shown in the battery icon. If “LOW BATTERY”
appears, you cannot operate with the player. In this case, charge the battery by
connecting to your computer.
Continued
Getting Started
Table of
Cont
ents
Menu
Inde
x
