62
Using the Menu
Adjusting playback
modes
To select playback
direction mode
Press MENU repeatedly to set
the cursor in the display to PB
MODE. Then press SET to select
the desired mode.
To play
Select
both sides repeatedly
s
both sides once
d
from the FWD side
To play a tape recorded
with Dolby* B NR system
Press MENU repeatedly to set
the cursor in the display to PB
;
NR (Dobly noise reduction).
Then press SET to show “
”.
* Manufactured under license from
Dolby Laboratories.
“Dolby”and the double-D
symbol are trademarks of Dolby
Laboratories..
Emphasizing Sound
On the main unit:
1
Press MENU repeatedly to set
the cursor in the display to
SOUND.
2
Press SET repeatedly to select
the sound emphasis of your
choice.
On the remote control:
1
Press SOUND repeatedly.
With each press, the
indications change.
The indications change as
follows:
RV : Sound Revitalizer.
Emphasizes treble sound.
MB : Mega Bass.
Emphasizes bass sound
(moderate effect).
GRV : Groove.
Emphasizes bass sound
(strong effect).
no message : normal (no
effect).
Notes
• If the sound is distorted with the
mode “GRV”, turn down the
volume of the main unit or select
other modes.
• You cannot change the mode
during fast-forward or rewind.
