SAFETY PRECAUTIONS
Read the following safety information prior to installation.
•
Assemble properly in the instructed order.
•
Do not remove backing or bolts after mounting the display.
•
Before installation of the display, pull the equipment power plug from the wall receptacle. Installing the display with the
power cable plug inserted in an outlet may result in fire or electric shock.
•
Consult authorized service personnel when moving or shifting unit after installation.
•
Do not climb on the unit once assembled and installed.
•
Do not use screws and attachment parts other than items enclosed.
•
The wall should be capable of supporting a weight of at least four (4) times the weight of the plasma display. Proper
installation procedure by qualified personnel as outlined in the installations instructions must be adhered to.
•
Always use at least two persons to install the display. If the work is done by a single person, the display may be dropped
and may cause an injury, or damage the plasma display.
•
Do not subject the unit to shocks while the display is installed.
•
After proper installation, secure the cables so that people or objects do not get tangled in them.
•
Keep display away from heater or other heat sources. The cabinet may warp if it is placed in direct sunlight or near an air
conditioner exhaust opening, stove or other heat source.
Failure to follow directions may result in serious bodily injury or damage to the unit.
