8
CAUTION
To prevent electric shock, do not use this polarized AC plug with an
extension cord, receptacle or other outlet unless the blades can be fully
inserted to prevent blade exposure.
Safety
s
Operate the TV only on 220 V AC.
s
The plug is designed, for safety purposes, to fit into the wall outlet
only one way. If you are unable to insert the plug fully into the outlet,
contact your dealer.
s
If any liquid or solid object should fall inside the cabinet, unplug the
TV immediately and have it checked by qualified service personnel
before operating it further.
s
If you will not be using the TV for several days, disconnect the
power by pulling the plug itself. Never pull on the cord.
s
For details concerning safety precautions, see “Important
Safeguards” on page 3.
Installing
s
To prevent internal heat buildup, do not block the ventilation
openings.
s
Do not install the TV in a hot or humid place, or in a place subject to
excessive dust or mechanical vibration.
s
If the TV is transported directly from a cold to a warm location, or if
the room temperature changes suddenly, the picture may be blurred
or show poor color due to moisture condensation. In this case, please
wait a few hours to let the moisture evaporate before turning on the
TV.
s
To obtain the best picture, do not expose the screen to direct
illumination or direct sunlight. It is recommended to use spot
lighting directed down from the ceiling or to cover the windows that
face the screen with opaque drapery. It is desirable to install the TV
in a room where the floor and walls are not of a reflective material.
CAUTION
Use the following SONY appliance(s) only with the following TV STAND
or WALL-MOUNT BRACKET. Use with other TV STAND or
WALL-MOUNT BRACKET is capable of resulting in instability causing
possible injury.
SONY APPLIANCE MODEL NO.
KDE-W50A10
SONY WALL-MOUNT BRACKET MODEL NO.
SU-PW3M
SONY TABLETOP STAND MODEL NO.
SU-PT3M
Trademark Information
TruSurround, SRS and the
symbol are trademarks of SRS Labs, Inc.
TruSurround technology is incorporated under license from SRS Labs, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 4482866. “BBE” and
BBE symbol are trademarks of BBE Sound, Inc.
Steady Sound, Digital Reality Creation, CineMotion, Memory Stick, and
Twin View are registered trademarks of Sony Corporation. BN Smoother
is trademark of Sony Corporation.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
This TV incorporates High-Definition
Multimedia Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Owner’s Record
The model and serial numbers are located at the rear of the TV, below the
Sony logo, on the sticker, and also on the TV box (white label). Record
these numbers in the spaces provided below. Refer to them whenever you
call upon your Sony dealer regarding this product.
Model No. ________________________________
Serial No.________________________________
On image retention
s
If the following images are displayed for an extended period of
time, image retention (afterimage) in areas of the screen may
result due to the characteristics of the Plasma Display Panel.
•
Black bars at the top and bottom that appear with a wide
video source (Letterbox picture)
•
Black bars to the left and right that appear with a 4:3 video
source (conventional TV broadcasts)
•
Video game sources
•
PC images
•
DVD on-screen menu displays
•
On-screen menus, channel numbers, etc., of connected
equipment such as Set-top box, Cable modem, VCR, etc.
The risk of this is higher if the TV is in “Vivid” mode or has a high
contrast setting. This image cannot be removed once burnt onto the
screen. To avoid the risk of occurrence, do not leave the TV operating
on such a picture, or program for a long time, use the “Screen Saver”
function or lower the contrast setting. Repeated extended daily usage
of the same image, or program can also result in this occurrence.
IMAGE RETENTION IS NOT COVERED BY THE SONY
WARRANTY.
s
To reduce image retention, this Plasma TV has the “Screen
Saver” function. The default setting of the “Orbit” function in
“Screen Saver” is “On”.
