Connecting the TV
24
Satellite Receiver
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receiver’s
SATELLITE IN jack.
2
Use A/V and S VIDEO cables to connect the satellite receiver’s AUDIO
and S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks.
3
Use a coaxial cable to connect your cable to the TV’s CABLE jack, or
your antenna to the TV’s VHF/UHF jack.
CABLE
VHF/UHF
VIDEO
AUDIO
VIDEO IN
L
(MONO)
R
1
3
Satellite receiver
A/V cable
Rear of TV
Satellite
antenna
cable
S VIDEO
S VIDEO cable
VIDEO
AUDIO-L
AUDIO-R
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
Coaxial cable
If your satellite receiver is not equipped with S VIDEO, use a VIDEO
cable (yellow) instead of the S VIDEO cable.