15
GB
First Time Operation
Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose
the language of the menu screen 2) choose the country in which you are going to operate the TV, 3) search and
store all available channels (TV Broadcast) and 4) change the order in which the channels (TV Broadcast)
appear on the screen.
However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate
option in the
(Set Up menu) or by pressing and holding the Auto Start Up button
on the top of TV set
for more than three seconds, see page 11.
1
Connect the TV plug to the mains socket (220-240V
AC, 50Hz).
2
The first time that the TV set is connected, it is usually
turned on. If the TV is off, press the
on/off button to
turn on the TV.
The first time you switch on the TV, a
Language
menu
appears automatically on the TV screen.
3
Press the
V
,
v
,
B
or
b
buttons on the remote control to select your
language, then press the
OK
button to confirm your selection. From
now on all the menus will appear in your chosen language.
4
The
Country
menu appears automatically. Press the
v
or
V
button
to select the country in which you are using the TV. Press the
OK
button to confirm your selection.
• If the country in which you want to use the TV set does not
appear in the list, select “-” instead of a country.
First Time Operation
Country
Select country
United Kingdom
Ireland
Nederland
België/Belgique
Luxembourg
France
Italia
Schweiz/Suisse/Svizzera
Deutschland
Österreich
continued...
