Portable Wireless Server
WG-C10
Connecting to a wireless LAN (Windows Vista)
1. Turn on this unit.
Wait until the (Wireless LAN indicator) lamp starts blinking green.
2. Right-click the icon on the task tray in the lower right of the computer
screen.
3. Click [Connect to a network].
4. Select "WG-C10-xxxxxx* "from the wireless network select screen, then click
[Connect].
*
"xxxxxx" of "WG-C10-xxxxxx" stands for the last 6 digits of the MAC address. For details on
the MAC address, see "
If you are asked for a network key, enter the password you set.
When [Connect] is displayed on the same line as "WG-C10-xxxxxx," this device
and the computer are connected.
Note
Depending on the computer environment you use, it may take time to connect this
unit and the computer.
Related Topic
Parts and controls
Turning the power on
Setting up the security
Setting the Wi-Fi security using "PWS Manager" (Android device)
Setting the Wi-Fi security using "PWS Manager" (iOS device)
4-468-627-14(1)
© 2013 Sony Corporation
208
Search