11
GB
Setting Up
As a protective measure, secure the TV. If you fail to do so, the TV may topple over resulting in
serious injury.
Warning
To avoid injury, place the TV Sound Bar System-installed TV less than 25 cm (9 7/8 in) from the
wall, and firmly secure the TV to the wall.
Notes
• Be careful not to pinch your fingers when setting up the TV or rack.
• Install the TV after allowing for a space of less than 25 cm (9 7/8 in) from the wall. The wall will prevent the
TV from falling even if the TV leans backward towards the wall.
When installing the TV on a rack
1
Place the TV on the center of the rack.
2
Fit the support belt (
G
) to the TV stand, then firmly fasten with the
screw for support belt (+PSW M4 × 10 mm) (
H
) using a screw driver.
3
Fasten the support belt to the rack with the wood screw for support belt
(M3.8 × 20 mm) (
I
).
Preventing the TV from toppling over
G
I
H
continued
Downloaded from
