19
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, fader,
and subwoofer volume.
The bass and treble levels and subwoofer volume
can be stored independently for each source.
1
Press
(SOURCE)
to select a source
(radio, CD, MD, or tape).
2
Press
(SOUND)
repeatedly to select
the item you want to adjust.
Each time you press
(SOUND)
, the item
changes as follows:
BAS (bass)
t
TRE (treble)
t
BAL (left-right)
t
FAD (front-rear)
t
Sub (subwoofer volume)
3
Press
(SEEK/AMS -)
or
(SEEK/AMS +)
to
adjust the selected item.
When adjusting with the rotary commander,
press
(SOUND)
and rotate the VOL control.
Note
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
Press
(ATT)
.
“ATT on” appears in the display momentarily.
To restore the previous volume level, press
(ATT)
again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
Changing the sound and
display settings
— Menu
The following items can be set:
Set up
• Clock (page 9)
• Beep — to turn the beeps on or off.
• RM (Rotary Commander) — to change the
operative direction of the controls of the rotary
commander.
– Select “norm” to use the rotary commander
as the factory-set position.
– Select “rev” when you mount the rotary
commander on the right side of the steering
column.
• Key ill (Key illumination) — to change the
illumination of the unit’s buttons.
– Select “Auto” to have the buttons light up
only with the car lights on. (Functions only
when the illumination control lead is
connected to the car’s illumination feed.)
– Select “on” to light up the buttons.
Dspl (Display)
• D.Info (Dual Information) — to display the
clock and the play mode at the same time (on).
(Functions only when Motion is set to “1” or
“off.”)
• Dimmer — to change the brightness of the
display.
– Select “Auto” to dim the display only when
you turn the lights on. (Functions only when
the illumination control lead is connected to
the car’s illumination feed.)
– Select “on” to dim the display.
– Select “off” to deactivate the Dimmer.
• Display
– When Display is set to “off,” the display
comes on only during an operation.
• Motion (Motion Display) — to select the
Motion Display mode from “1,” “2,” and “off.”
• A.Scrl (Auto Scroll)*
– Select “on” to scroll all automatically
displayed names exceeding 13 characters.
– When Auto scroll is set to off and the disc/
track name is changed, the disc/track name
does not scroll.
*
When no CD or MD is playing, this item will not
appear.
continue to next page
t
Summary of Contents for WX-4500X Installation/Connections
Page 28: ...2 01 0 23 456 789 0 A BC4 89 0 A D6 EF G HIJKLM N OAP QRJSKM N OATTP 0123 452367 8 9 ...
Page 30: ...4 SEEK AMS SEEK AMS TAPE CD EQ7 DSO OFF SCRL SA SOUND MENU DSPL ATT SOURCE MODE ...
Page 56: ...4 컨트롤 스위치류의 위치 SEEK AMS SEEK AMS TAPE CD EQ7 DSO OFF SCRL SA SOUND MENU DSPL ATT SOURCE MODE ...
