36
E:\#Data Disc\4164312221\41643122XAV60EUR\01GB02CD-EUR.fm
masterpage:Left
XAV-60
4-164-312-
22
(1)
Adjusting the sound
characteristics
The sound balance between left and right
speakers (“Balance”) and front and rear speakers
(“Fader”) can be adjusted to your preference.
You can also adjust the volume level of
subwoofer if it is connected.
1
During reception/playback, touch
“Source List,” then
.
2
Touch “Sound.”
The sound setting menu appears.
3
Touch “Balance/Fader.”
The setting display appears.
4
Touch
B
/
V
/
v
/
b
to adjust the balance/
fader.
The level is adjustable in single steps between
–15 and +15 (Balance)/–15 and +15 (Fader).
5
Touch +/– to adjust the volume level of
subwoofer.
This setting is adjustable only when
subwoofer is connected and “Subwoofer” is
set to “ON” (page 42).
The level is adjustable in single steps,
between –6 and +6.
To return to the previous display, touch “Back.”
Optimizing sound for the
listening position
— Intelligent Time Alignment
The unit can change the localization of sound by
delaying the sound output from each speaker to
suit your position, and simulate a natural sound
field with the feeling of being in the center of it
wherever you sit in the car.
The options for “Listening Position” are
indicated below.
You can also set the approximate subwoofer
position from your listening position if:
– the subwoofer is connected and “Subwoofer” is
set to “ON” (page 42).
– the listening position is set to “Front L,” “Front
R,” “Front” or “All.”
1
During reception/playback, touch
“Source List,” then
.
2
Touch “Sound.”
The sound setting menu appears.
3
Touch “Listening Position.”
The setting display appears.
4
Set the listening position.
Touch “Front L,” “Front R,” “Front,” “All” or
“Custom.”
5
Set the subwoofer position.
If you select “Front L,” “Front R,” “Front” or
“All” in step 4 above, you can set the
subwoofer position.
Touch “Near,” “Normal” or “Far.”
The setting is complete.
To cancel Intelligent Time Alignment, select
“OFF.”
To return to the previous display, touch “Back.”
Precisely calibrating the listening
position
— Intelligent Time Alignment Tune
You can precisely calibrate your listening
position from each speaker so that the sound
delay reaches the listener more correctly.
Before starting, measure the distance between
your listening position and each speaker.
1
During reception/playback, touch
“Source List,” then
.
2
Touch “Sound,” then “Listening
Position.”
12:00
15
ATT
Back
Balance/Fader/Subwoofer Level Adjust
Top
Subwoofer : 0
Fader : 0
Balance : 0
“Front L”
(
1
): Front left
“Front R”
(
2
): Front right
“Front”
(
3
): Center front
“All”
(
4
): In the center of
your car
“Custom”
: Precisely
calibrated position (page 36)
“OFF”
: No position set
1
2
4
3
