18
GB
Steering Control
You can operate the unit with buttons on the
steering wheel.
For safety, park your car before making this
setting.
Unit status: Any status
User Defined
This setting is available only when [Steering
Control] is set to [User].
The steering button panel appears.
Press and hold the button you want to assign
to the steering wheel.
The button on the panel lights up (standby).
Press and hold the button on the steering
wheel you want to assign the function to.
The button on the panel changes to blue
(registration complete).
To register other buttons, repeat steps
and
.
Unit status: Any status
Notes
If an error occurs while registering, all the registered
information is cleared. Restart registration from the
beginning.
If leave the setting display and reconfigure the
setting, all the registered information is cleared.
Restart registration from the beginning.
This function may not be available on some vehicles.
For details on the compatibility of your vehicle, visit
the support site on the back page.
Bluetooth Connection
Unit status: Any status
Bluetooth Device Info
Unit status: Any status
Bluetooth Reset
Unit status: Any status
HOME Key Function (hold 2 sec push)
Unit status: Any status
Option
Purpose
User
To display the instruction and
panel for steering wheel control.
External (
)
To deactivate steering wheel
control.
To use rotary commander
control.
Option
Purpose
–
To display the instruction and
control panel.
Option
Purpose
ON, OFF (
)
To activate the BLUETOOTH
signal.
Option
Purpose
–
To display the device connecting
to the unit by touching [Open].
(Available only when [Bluetooth
Connection] is set to [ON].)
Option
Purpose
–
To initialize all BLUETOOTH-
related settings such as pairing
information, call history, preset
dial, history of connected
BLUETOOTH devices, etc.
Option
Purpose
Voice, DSPL (
)
To assign the voice command
function or the display menu to
the HOME button.
