XAV-AX210
9
Sony CONFIDENTIAL
For Authorized Servicer
13. Unsolder the shortland (SL001) on the MAIN board short-cir-
cuited in step 3, and open the short-circuit.
Note 5:
Be sure to open the short-circuit of shortland (SL001).
rear
side
front
side
– MAIN board (Side A) –
14. Install the top cover and mechanism deck removed in step 2.
Note 6:
The following is an image view. Be sure to refer to “3. DISASSEM-
BLY” on page 15 for detail.
top cover
mechanism deck
15. Complete the serial number writing work.
COMMUNICATION CHECK OF Apple CarPlay OR Android
Auto
When the MAIN board or TFT board is replaced, be sure to perform
the communication check of Apple CarPlay or Android Auto.
It is not necessary to check both of Apple CarPlay and Android
Auto. Check the communication with using either application.
Note 1:
If the application of Apple CarPlay or Android Auto cannot be pre-
pared, perform the “Checking procedure if Apple CarPlay or An-
droid Auto cannot be prepared” on page 10.
Replacement parts that having the need to perform the
communication check:
• MAIN
board
• TFT
board
Preparation:
• In the case of checking with using the Apple CarPlay:
iPhone that is installed the Apple CarPlay and USB cable for
connection to the main unit
• In the case of checking with using the Android Auto:
Android phone that is installed the Android Auto and USB cable
for connection to the main unit
Note 2:
Refer to Operating Instructions of this unit about important point
for Apple CarPlay and Android Auto.
Connection:
– Rear view –
Android phone
or
iPhone
USB cable
+
–
Regulated DC
power supply
Checking procedure:
1. Refer to “Connection”, and connect the iPhone or Android
phone to the main unit with USB cable.
2. Press the [HOME] button on the main unit, and touch the Apple
CarPlay icon or Android Auto icon.
Note 3:
Depending on the setting, when you connect a iPhone or Android
phone the application may start up automatically.
Android Auto icon
(or Apple CarPlay icon)
[HOME] button
(Displayed screen in the above
fi
gure are example)
3. Operate the Apple CarPlay or Android Auto, check that the navi-
gation screen is displayed and the music can play.
Navigation display
Music play
(Displayed screen in the above
fi
gure are example)
4. Remove the iPhone or Android phone that is connected to the
main unit.
– Continued on next page –
SYS SET
2018/09/12 22:50:21 (GMT+09:00)
