10
Names and Functions of Parts
l
DC OUT 12V 1A connector (XLR 4-
pin)
Su12 V power to a monitor or other
external device.
The pin assignments are as follows.
m
INTERCOM connector (XLR 5-pin)
Allows you to connect an XLR 5-pin type
headset. The pin assignments are as
follows.
Contact your dealer or a Sony service representative
for information about how to adjust the side tone
level.
n
AUX connector (15-pin)
Connect to an external system to input and
output tally signals, trunk line signals, and
timecode.
Provides a trunk line connection to the
trunk line of the camera adaptor via a RS-
232C interface, for use as a
communications line with external devices.
Also equipped with general-purpose lines
between this camcorder and the XDCU-50.
The pin assignments are as follows.
Pin No.
Signal name
1
GND
2
Not used
3
Not used
4
+12V
Pin No.
Signal name
1
INCOM MIC GND
2
INCOM MIC IN
3
INCOM RECEIVE GND
4
INCOM RECEIVE OUT
5
Not used
Pin
No.
Signal name
Description
2
TC (X) OUT
Timecode signal
output
7
TC (G) OUT
3
TRUNK RX
Trunk line (RS-
232C)
13
TRUNK TX
8
TRUNK (G)
4
RET CONT IN
Return control
external input
On:
GND
Off:
Open
9
MIC CONT IN
Intercom
microphone
control input
On:
GND
Off:
Open
5
GND
Ground
10
TALLY GND
TALLY output
14
R TALLY OUT
Red tally output
(open collector)
15
G TALLY OUT
Green tally
output (open
collector)
1
AUX VIDEO (X) General-
purpose analog
video line
between this
adaptor and
XDCU-50
6
AUX VIDEO (G)
Summary of Contents for XDCA-55
Page 16: ...Printed in China ...
