Sony XDCA-55, Operating Instructions Manual

12

System Configuration

System Configuration

The following figure shows the 
configuration of a system that includes the 
adaptor.

Refer to the XDCU-50 Operating Instructions for 
details about how to use the adaptor when it is 
connected to the XDCU-50.

Do not connect or disconnect the cables 
connecting this adaptor and XDCU-50 
(CCZ-A and BNC cables) while the system 
is powered on. The excessive current 
protection function may be activated, 
cutting off power to the power circuits of 
this adaptor or the XDCU-50.
If the power should be cut off, connect the 
cables again in the proper fashion and wait 
for a while before starting the system again.

Attaching the Adaptor to a 
Camcorder

1

Screw two of the brackets supplied 
with this adaptor to the battery 
attachment shoe of the camcorder.

2

Attach the adaptor to the battery 
attachment shoe of the camcorder.

3

Tighten the attachment screws at the 
top of the adaptor.

Camcorder (with optional CBK-
CE01/HD02 installed in the 
camera adaptor connector)

This adaptor

XDCU-50

a) CCZ-A cable
b) BNC cable

Note

Brackets (supplied)