This is an internet version of this publication. © Print only for private use.
Increasing Wi-Fi Signal Strength
There are a number of things you can do to improve Wi-Fi reception:
• Move your device closer to the Wi-Fi access point.
• Move the Wi-Fi access point away from any potential obstructions or interference.
• Don’t cover the Wi-Fi antenna area of your device .
Wi-Fi Settings
When you are connected to a Wi-Fi network or when there are Wi-Fi networks
available in your vicinity, you can view the status of these networks. You can also
enable your device to notify you whenever an open Wi-Fi network is detected.
To Enable or Disable Wi-Fi Network Notifications
1 Turn on Wi-Fi, if it is not on already.
2 From your Home screen, tap
.
3 Find and tap Settings > Wi-Fi.
4 Tap , then tap the Network notification slider.
To View Detailed Information About a Connected Wi-Fi Network
1 From the Home screen, tap
.
2 Find and tap Settings > Wi-Fi.
3 Tap the Wi-Fi network you are currently connected to. Detailed network
information is displayed.
To Add a Wi-Fi Sleep Policy
1 From the Home screen, tap
.
2 Find and tap Settings > Wi-Fi.
3 Tap , then tap Keep Wi-Fi on during sleep.
4 Select an option.
To Find the MAC Address for Your Device
1 From the Home screen, tap
.
2 Find and tap Settings > Wi-Fi.
3 Tap . The MAC address is displayed in the list.
WPS
WPS (Wi-Fi Protected Setup™) is a wireless networking standard that helps you to
establish secure wireless network connections. WPS makes it easy for you to set up
Wi- Fi Protected Access® (WPA) encryption to secure your network. You can also
add new devices to an existing network without entering long passwords.
Use one of these methods to enable WPS:
• Push button method – simply push a button on a WPS-supported device, for example, a
router.
39