78
CUC Data Transfer
1.
In
“Panel/PQ”
service mode
a.
Go to
“WB/Mura/CUC data transfer”
category by “↑” or “↓”.
b.
To select
“WB/Mura/CUC data transfer”
, press → button.
c.
To change data , press “←” or “→” on remote commander.
2. In
“WB/Mura/CUC data transfer”
a. Select “
CUC data transfer
” by pressing “↑” or “↓” on remote
commander .
b.
To change the items, press “←” or “→” on remote commander
and press “Enter” button.
Choose
1. T-con to SoC
and press “Enter” button.
c. “Mura data transfer” is also displayed on the menu, but Mura
function does not work on
OLED model
. Please skip this item. by
pressing “
↓
” on remote commander .
c. Select “[start]” and press “Enter” button to start transfer.
Disuse in
OLED
model
S E R V I C E A D J U S T M E N T
SAFETY NOTES
SELF DIAGNOSTIC FUNCTION
TROUBLESHOOTING
SERVICE ADJUSTMENT
DIAGRAM
HANDLING GUIDE
Please apply Main board or panel is replaced.
78
SYS SET
2021/02/04 23:38:48 (GMT+09:00)
