35
Pin No.
Pin Name
I/O
Description
44
HSEN 2
I
Slide motor (M21) rotation sensor input terminal
This is also used for monitor horizontal position adjustment
45
NC
—
Not used (open)
46
VSEN 0
I
Monitor close detect switch (S102) input terminal
“L” is input when monitor falls down completely, “H” is input at other position
47
VSEN 1
I
Monitor open detect switch (S11) input terminal
“L” is input when monitor rises up completely, “H” is input at other position
48
VSEN 2
I
Angle motor (M11) rotation sensor input terminal
This is also used for monitor tilt angle adjustment
49
PARKING
I
Parking brake sensor input terminal
“L” is input during parking, “H” is input during running
50
VSS
—
Ground terminal
51
S.MUTE
O
Power on muting control signal output to the power amplifier (IC105) “H”: muting on
52
LED A/G
O
Selection signal output of the LED illumination “L”: amber, “H”: green
53
LED BRIGHT
O
LED drive signal output of the –, +, SEARCH –, , ANGLE SLIDE, OFF, DSPL,
SELECT, V ADJ, /– (D721 to 725, LSW704, 706, 709 to 717) indicators
“L”: LED on
54
SIRCS
O
Sircs remote control signal input from the remote control receiver (IC701)
55
MASTER
I
Control signal input terminal Not used (open)
56
AV SW
I
Control signal input terminal Not used (open)
57
VCC
—
Power supply terminal (+5V)
58
BUS SW
O
LED drive signal output of the TV/VIDEO (D719, LSW708) indicators “L”: LED on
59
RF CONT
O
Not used (open)
60
H.MO 0
O
Slide motor (M21) drive signal output “L” active
61
H.MO 1
O
Slide motor (M21) drive signal output “L” active
62
V.MO 0
O
Angle motor (M11) drive signal output “L” active
63
V.MO 1
O
Angle motor (M11) drive signal output “L” active
64
REM SEL
O
Signal is output to select sircs remote control signal output from remote control receiver (IC701)
and SIRCS (pin
tf
)
“L”: Signal from IC701, “H”: Signal from SIRCS (pin
tf
)
