5
Connection Example
For details, see the section “
1
Car Systems Connections” (pages 8 - 10). Be sure to refer also to the
documentation for all other components in the system.
System configuration
VIDEO OUT
CAMERA IN
VIDEO1 IN
VIDEO2 IN
AUDIO OUT
*1 Sony BUS DVD Master-unit will come in 2005.
*2 In case of other manufacture’s Master-units, audio signal is reproduced through FM modulator.
To output the audio of other manufacture’s Master-units using the RF modulator
If you connect a genuine car audio or a car audio without the TV control function to the TV unit, its audio
can be output through the TV unit’s built-in monaural speaker. You can also receive and hear the sound
from the FM tuner of the car audio by converting the audio signal to FM.
Preparations
• To use this function, connect the FM antenna of the car audio referring to page 9. Without a proper
connection, this function will not be effective.
• You may need to change the transmitted frequency or output level (see “Tips” below).
1
Press TV/VIDEO repeatedly to select the function of the connected device.
2
Press CUSTOM on the unit.
“RF OUTPUT ON” appears in the monitor.
If you have changed the function of the CUSTOM button, select RF OUTPUT ON or OFF from a Menu
screen.
3
Select the FM tuner from the car audio source, and tune in to “88.3 MHz”.
Once the audio is output, adjust the volume level with the car audio.
Tips
• If there is a broadcasting station of the same frequency as the transmitted frequency set on the TV unit, the sound of
TV or the connected device may be difficult to be heard, or noise may occur. In this case, change the transmitted
frequency on built-in RF modulator of the TV unit. For more information about how to change the frequency, see
“Changing the transmitted frequency on TV unit” on page 22. (The default setting is “88.3MHz”.)
• You can change the output level of the TV unit according to the input level of the FM tuner of a car audio. For more
information about how to change the setting, see “Changing the output level on the TV unit” on page 22. (The
default setting is “MID”.)
Video Camera (optional)
Mobile Colour TV XTL-W7000
Back Camera
(optional)
Sony BUS DVD Master-unit
(optional)
*1
Sony VCD Master-unit
(optional)
The other Master-unit (optional)
*2
Rear Monitor
(optional)
DVD Player (optional)
or
or
or
Summary of Contents for XTL-W7000
Page 34: ...12 拆卸機架 安裝本機之前 請拆卸本機的機架 1 將兩把解鎖鑰匙 qa 一起插入本機和機架 8 中直到聽 到喀嗒聲 2 拉下機架 8 然後向上拉本機使其分離 8 qa 將掛勾朝內 m ...
Page 46: ......
Page 47: ......
