ZS-RS70BT/RS70BTB
24
CD SERVICE MODE
This mode can move the SLED of the optical pick-up, and also can
turn the optical pick-up laser power on and off.
C1 error, C2 error, frame jump error, focus drive low-pass value
and SubQ displayed.
The disturbance level of FE and TE can be set up.
Procedure:
1. Press the [POWER] (Except AEP and UK models)/[OPER-
ATE] (AEP and UK models) button to turn the power on.
2. Press the [CD] button to select CD function.
3. Press three buttons of the [CD], [VOLUME –] and [MODE]
simultaneously.
4. The message “SE MODE” appears on the liquid crystal dis-
play.
Key Operation:
[– PRESET
.
], [
>
] (CD stop states):
Use these keys to move the SLED. When [
>
] is
pressed in this mode, the SLED moves to outer circumference and
the message “SL OUT” is displayed.
When [– PRESET
.
] is pressed in this mode, the SLED moves
to inner circumference and the message “SL IN” is displayed.
[MODE]:
Use this key to turn the optical pick-up laser power on and off.
When the laser power is turned on, the message “LD ON” is dis-
played. When the laser power is turned off, the message “LD OFF”
is displayed.
[MANUAL PRESET
u
]:
Use this key to CD play. On the liquid crystal display, C1 error
is displayed. Each time [
LIGHT SYNC
DISPLAY] button
pressed, the display changes C2 error, SubQ frame jump error, fo-
cus drive low-pass value this order, and returns to the C1 error
display.
Each time [REC CD
B
USB] button is press and hold for 2 sec-
onds, source change to “CD” or “AUDIO IN”.
(Displayed characters/values in the following
fi
gure are example)
: C1 error display mode
: C2 error display mode
: SubQ frame jump error
display mode
The integrated value
for 1 second of error
CD: CD source
No mark: AUDIO IN source
SubQ A seconds
SubQ A minutes
(C1 error, C2 error and SubQ frame jump error display)
CD
Focus drive low-pass value
No mark
CD: CD source
No mark: AUDIO IN source
SubQ A seconds
SubQ A minutes
(Focus drive low-pass value display)
CD
[CD], [ MEMORY SELECT USB] (CD playing states):
Use these keys to FE disturbance level setting. When [CD] is
pressed, the FE disturbance level is up. When [MEMORY SE-
LECT USB] is pressed, the FE disturbance level is down. (This
screen display returns in about two seconds)
(Displayed characters/values in the following
fi
gure are example)
FE Disturbance level
[ERASE], [ENTER] (CD playing states):
Use these keys to TE disturbance level setting. When [ERASE] is
pressed, the TE disturbance level is up. When [ENTER] is pressed,
the TE disturbance level is down. (This screen display returns in
about two seconds)
(Displayed characters/values in the following
fi
gure are example)
TE Disturbance level
[
AUTO PRESET RADIO FM/AM] (Except AEP and UK mod-
els)/[
SCAN RADIO DAB/FM] (AEP and UK models), [AUDIO
IN] (CD playing states):
Use these keys to disturbance frequency setting. When [
AUTO
PRESET RADIO FM/AM] (Except AEP and UK models)/[
SCAN RADIO DAB/FM] (AEP and UK models) is pressed, the
disturbance frequency is up. When [AUDIO IN] is pressed, the
disturbance frequency is down. (This screen display returns in
about two seconds)
(Displayed characters/values in the following
fi
gure are example)
Disturbance frequency
[
x
]
: CD stop
[– PRESET
.
] (CD playing states)
: Select a track
[
>
] (CD playing states)
: Select a track
[– PRESET
.
] hold down (CD playing states) : Fast backward
[
>
] hold down (CD playing states) : Fast forward
[]
: Volume up
[VOLUME –]
: Volume down
Releasing method:
Press three buttons of the [CD], [VOLUME –] and [MODE] si-
multaneously.
Summary of Contents for ZS-RS70BT
Page 79: ...MEMO ZS RS70BT RS70BTB 79 ...
