ZS-S10CP_ CED/AU6 [GB] 4-414-779-32(1)
Using the display
You can check information about the CD using the
display.
Checking the information of an audio CD
To check the total track number and playing
time of the CD
After reading the CD, the total playing time will
appear, or press
twice to cancel Resume play.
Total playing time
Checking the information of an MP3 disc
To check the total folder/file number and total
file number on the CD
After reading the folder/file information, the total
folder number and the file number will appear, or
press
twice to cancel Resume play.
Total file number
Total folder number
Playing tracks/MP3 files repeatedly
(Repeat Play)
You can play tracks/MP3 files repeatedly in normal
and program play modes.
1
Press OPERATE (or POWER)
.
2
Press CD
.
3
Proceed as follows, while CD/MP3 disc is not
playing.
To repeat
Do this
A single
track/MP3
file
1 Press MODE
(press
, then
press MODE
during playback) until
“
1
”
appears.
2 Press
or
to select the
track/MP3 file that you want to repeat.
3 Press
.
All tracks/
MP3 files
on the CD
1 Press MODE
(press
, then
press MODE
during playback) until
“ ”
appears.
2 Press
.
A selected
folder (MP3
disc only)
1 Press MODE
(press
, then
press MODE
during playback) until
“ ”
and
“ ”
appear.
2 Select the folder by pressing /TUNE
+ or –
.
3 Press
.
Programmed
tracks/MP3
files
1 Program tracks/MP3 files (see
“
Creating your own program
”
).
2 Press MODE
(press
, then
press MODE
during playback) until
“
PGM
”
and
“ ”
appear.
3 Press
.
Note
You cannot change the play mode while a track/MP3 file is
playing or paused.
When you press MODE
during playback,
“
PUSH STOP
”
appears in the display.
To cancel Repeat Play
Press MODE
(press
, then press MODE
during playback) until
“ ”
disappears from the
display.
Playing tracks/MP3 files in random
order
(Shuffle Play)
You can play tracks/MP3 files in random order.
1
Press OPERATE (or POWER)
.
2
Press CD
.
3
Press MODE
(press
, then press MODE
during playback) until
“
SHUF
”
appears in the
display.
4
Press
to start Shuffle Play.
To cancel Shuffle Play
Stop playing first. Then press MODE
(press
,
then press MODE
during playback) until
“
SHUF
”
disappears from the display.
Note
You cannot change the play mode while a track/MP3 file is
playing or paused.
When you press MODE
during playback,
“
PUSH STOP
”
appears in the display.
Tips
During Shuffle Play, you cannot select the previous track/MP3
file by pressing
.
The resume function does not work during Shuffle Play.
Other Operations
Creating your own program
(Program
Play)
You can arrange the playing order of up to 20 tracks/
MP3 files on a CD.
1
Press OPERATE (or POWER)
.
2
Press CD
.
3
Press MODE
(press
, then press MODE
during playback) until
“
PGM
”
appears in the
display.
4
Press
or
to select the track.
For MP3 files, press /TUNE + or –
first and
then press
or
.
Track (File) number flashes in the display.
Audio CD
MP3 disc
5
Press DISPLAY/ENTER
.
“
P-xx
”
appears in the display.
Audio CD
MP3 disc
6
To program another song, repeat steps
4
and
5
.
7
Press
to start Program Play.
To cancel Program Play
Stop playback first. Then press MODE
until
“
PGM
”
disappears from the display.
To check the order of tracks/MP3 files
Press DISPLAY/ENTER
(press
, then press
DISPLAY/ENTER
during playback).
The last programmed step number appears in the
display. After a few seconds, the last programmed
track/folder number appears in the display.
To change the current program
Press
once if the CD is stopped and twice
if the CD is playing. The current program will be
erased. Then create a new program following the
programming procedure.
Tips
If you try to program 21 tracks/MP3 files or more,
“
FULL
”
will
appear in the display.
You can play the same program again, since the program is
saved until you open the CD compartment.
The resume function does not work during Program Play.
Presetting radio stations
You can store radio stations into the unit’s memory.
You can preset up to 30 radio stations, 20 for FM and
10 for AM in any order.
1
Press OPERATE (or POWER)
.
2
Press RADIO BAND
to select the band.
3
Hold down AUTO PRESET
for 2 seconds until
“
AUTO
”
flashes in the display.
4
Press DISPLAY/ENTER
.
The stations are stored in memory from the lower
frequencies to the higher ones.
If a station cannot be preset automatically
You need to preset a station with a weak signal
manually.
1
Press OPERATE (or POWER)
.
2
Press RADIO BAND
to select the band.
3
Tune in a station you want using /TUNE + or
–
.
4
Press MANUAL PRESET
.
The band selected (
“
FM-xx
”
or
“
AM-xx
”
) appears in
the display.
5
Press or –
until the preset number you
want for the station flashes in the display.
6
Press DISPLAY/ENTER
.
The new station replaces the old one.
Tip
The preset radio stations remain in memory even if you unplug
the AC power cord or remove the batteries.
Playing preset radio stations
1
Press OPERATE (or POWER)
.
2
Press RADIO BAND
to select the band.
3
Press or –
to tune in the stored
station.
Connecting optional components
You can enjoy the sound from an optional component
such as a portable digital music player through the
speakers of this unit. Be sure to turn off the power
of each component before making any connections.
For details, refer to the instruction manual of the
component to be connected.
1
Connect the AUDIO IN jack
to the line output
jack of the portable digital music player or other
components using an audio connecting cable (not
supplied).
2
Press OPERATE (or POWER)
to turn the unit on.
3
Turn the connected component on.
4
Press AUDIO IN
, and start playback on the
connected component.
The sound from the connected component is
output from the speakers of this unit.
To connect the unit to a TV or VCR, use an
extension cable (not supplied) with a stereo-mini
jack on one end and two phono plugs on the other
end.
Precautions
Discs that this unit CAN play
• Audio CD
• CD-R/CD-RW (CD-DA
*
/MP3 files)
*
CD-DA is the abbreviation for Compact Disc Digital Audio. It is a
recording standard used for Audio CDs.
Discs that this unit CANNOT play
• CD-R/CD-RW other than those recorded in music CD
format or MP3 format conforming to ISO9660 Level
1/Level 2 or Joliet
• CD-R/CD-RW of poor recording quality, CD-R/CD-RW
that has scratches or is dirty, or CD-R/CD-RW recorded
with an incompatible recording device
• CD-R/CD-RW which is finalized incorrectly
Notes on discs
• Before playing, clean the CD
with a cleaning cloth. Wipe the
CD from the center out. If there
is a scratch, dirt or fingerprints
on the CD, it may cause tracking
error.
• Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.
• Do not expose the CD to direct sunlight or heat
sources such as hot air ducts, or leave it in a
car parked in direct sunlight as there can be a
considerable rise in temperature inside the car.
• Do not stick paper or a sticker on the CD, or scratch
the surface of the CD.
• After playing, store the CD in its case.
On safety
• As the laser beam used in the CD player section is
harmful to the eyes, do not attempt to disassemble
the casing. Refer servicing to qualified personnel
only.
• Should any solid object or liquid fall into the unit,
unplug the unit, and have it checked by qualified
personnel before operating it any further.
• Discs with non-standard shapes (e.g., heart, square,
star) cannot be played on this unit. Attempting to
do so may damage the unit. Do not use such discs.
On power sources
• For AC operation, check that the unit’s operating
voltage is identical with your local power supply
(see
“
Specifications
”
) and use the supplied AC
power cord; do not use any other type.
• Unplug the unit from the wall outlet when it is not
be used for an extended period of time.
• If the batteries are not to be used, remove them
to avoid damage that can be caused by battery
leakage or corrosion.
On placement
• Do not leave the unit in a location near heat sources,
in a place subject to direct sunlight, excessive dust
or mechanical shock, or in a car subject to the direct
rays of the sun.
• Do not place the unit on an inclined or unstable
place.
• Do not place anything within 10 mm of the side
of the cabinet. The ventilation holes must be
unobstructed for the unit to operate properly and
prolong the life of its components.
• Since a strong magnet is used for the speakers,
keep personal credit cards using magnetic coding
or spring-wound watches away from the unit to
prevent possible damage from the magnet.
On operation
• If the unit is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lens inside the CD player
section. Should this occur, the unit will not operate
properly. In this case, remove the CD and wait about
an hour for the moisture to evaporate.
• The design of the carrying handle prohibits you from
lifting it forcibly while the CD compartment is open.
Carrying handle
Cleaning the cabinet
• Clean the cabinet, panel and controls with a soft
cloth slightly moistened with a mild detergent
solution. Do not use any type of abrasive pad,
scouring powder, or solvent, such as alcohol or
benzine.
If you have any questions or problems concerning
your unit, please consult your nearest Sony dealer.
General
The power does not turn on.
Connect the AC power cord to the wall outlet
securely.
Make sure the batteries are inserted correctly.
Replace all the batteries with new ones if they are
weak.
There is no audio.
Unplug the headphones when listening through
speakers.
Noise is heard.
Someone is using a portable telephone or other
equipment that emits radio waves near the unit.
Move the portable telephone, etc., away from
the unit.
CD/MP3 player
The CD does not play or
“
noDISC
”
is displayed
even when a CD is in place.
Place the CD with the label surface up.
Clean the CD.
Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
The CD-R/CD-RW is blank.
There is a problem with the quality of the CD-R/
CD-RW, recording device or application software.
Replace all the batteries with new ones if they are
weak.
The sound drops out.
Reduce the volume.
Clean the CD, or replace it if the CD is badly
damaged.
Place the unit in a location free from vibration.
Clean the lens with a commercially available blower.
The sound may drop out or noise may be heard
when using a poor quality CD-R/CD-RW or if there is
a problem with the recording device or application
software.
Starting playback takes more time than usual.
The following discs take a longer time to start
playback.
– a disc recorded with a complicated tree structure.
– a disc that has not been finalized (a disc to which
data can be added).
– a disc that has many folders or non-MP3 files.
Radio
Reception is poor.
Reorient the
antenna to
improve FM
reception.
Reorient the unit
itself to improve
AM reception.
The audio is weak or is poor quality.
Replace all the batteries with new ones if they are
weak.
Move the unit away from the TV.
If you are using the remote while listening to AM
radio, noise may be heard.
The TV picture becomes unstable.
If you are listening to an FM program near the TV
with an indoor antenna, move the unit away from
the TV.
After trying the remedies, if you still have problems,
unplug the AC power cord or remove all the batteries.
After all the indications in the display disappear, plug
the AC power cord back in, or insert the batteries
again. If the problem persists, please consult your
nearest Sony dealer.
Troubleshooting
