Additional Information
29
Troubleshooting
Symptom
The power is not on.
The power is not on, and “bAttErY”
and “CHECK” are displayed
alternately.
There is no audio.
Noise is heard.
“no diSC“ lights in the display even
when a CD is in place.
The CD does not play.
The sound drops out.
Noise is heard
Remedy
• Connect the AC power adaptor to a wall outlet
securely.
• Make sure the batteries are inserted correctly.
• Make sure the batteries are inserted correctly.
• Replace all the batteries with new ones if they
are weak.
• Make sure the function you want to use appears
in the display window.
• Adjust the volume.
• Unplug the headphones when listening through
speakers.
• Someone is using a portable telephone or other
equipment that emits radio waves near the
player.
t
Move the portable telephone, etc.,
away from the player.
• Place the CD with the label surface facing to
you.
• Place the CD until it clicks into place.
• Make sure that the CD compartment is closed
securely.
• Place the CD until it clicks into place.
• Place the CD with the label surface facing to
you.
• Clean the CD.
• Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
• Make sure “Cd” appears in the display.
• Reduce the volume.
• Clean the CD, or replace it if the CD is badly
damaged.
• Place the player in a location free from
vibration.
• The sound may drop out or noise may be heard
if the CD is recorded using a personal computer
(CD-R, etc.)
General
CD Player
continued