background image

Security Instructions 

Before use the treadmill, please read the following instructions carefully: 

1.

Turn  on  the  power  only  after  confirming  that  the  treadmill  is  installed

according  to  the  installation  instructions.  Always  pay  attention  that  don’t  to
block the plug on the wall when placing the plug, and leave a space of 0.8m at
least in front of the treadmill for a easy insertion.

2.

Reserve a safety space of 0.8m on each side of the treadmill machine and a

2m (length) x1 meter (width) behind the treadmill machine.

3.

Connect the power supply with safety grounding. If the power cord is worn,

please buy a new power card from a distributor and let a professional person
to replace it.

4.

The walking machine is an appliance for indoor use. Don’t use it outdoors.

The place where use the machine must be clean and flat. Be sure that don’t to
place  the  walking  machine  on  elements  such  as  thick  carpets,  so  as  not  to
affect the air circulation under the machine. The electric treadmill is a special
appliance, don’t modify it or use it for other purposes.

5.

Don’t wear clothing which is large or loose during exercise to avoid  to the

cloth get stuck in the treadmill. It’s recommended that wear running shoes or
gym shoes with rubber soles.

6.

Don’t remove the protective cover. If you need to open the protective cover

for maintenance, first unplug the power cord.

7.

When  you  use  the  treadmill,  keep  the  children  away  from  it  for  avoiding

accidents. This treadmill should not be used by children.

8.

If the treadmill accelerates suddenly due to a problem about the electronic

clock system or if the speed increases automatically and continuously, remove
the electronic clock safety lock immediately, then the electric treadmill will stop
immediately.

9.

If the system can’t stop, let your feet step on the side bars on both sides and

turn off the power immediately.

10.

When  you don’t  use  the treadmill  any more,  you must  unplug the power

cord.

Summary of Contents for A90-220V80













Reviews: