Page | 5
3. INSTALLATION INSTRUCTION
1)
Connect the front tube with the frame and install the plain washer 10 (no.3) to the bolts
and put on the cover-shaped screws. Use open spanner to tighten them. Assemble
the back tube is the same way.
Note: Please adjust the black feet strap to balance the bike if it is unstable.
2)
The feet straps are marked with
“L” and “R”.
Please add 2 drops of the locking liquid in the
“R” strap and fasten it with a screw and in the
right threaded hole using the spanner. Repeat
for the left strap too.
(Note
:
“L” and “R” are marked on the crank as
well. Please install them accordingly otherwise it
will damage the products. Please ensure the
feet straps are fastened securely, otherwise
they will come undone after a long period of
use.
Summary of Contents for A90-238
Page 20: ......
