Astaro Security Gateway 625
Operating Instructions
Three actions can be executed with the membrane keys
Ì
Factory reset:
All settings are reset to the factory settings. The factory
reset function sets all of the configuration settings and options to their
original state. All data entered after the initial installation will be deleted,
including the HTTP proxy cache, the entire email queue, accounting and
reporting data, passwords, and uninstalled Up2Date packages.
The version of the software will not change. That is, all firmware and
pattern updates that have been installed will be retained.
Ì
Reboot machine:
The security appliance is rebooted. The reboot action
will shut down the system completely and reboot.
Ì
Shut down:
The security appliance is shut down. The shut down action
allows you to turn off the system, and allows you to cleanly stop all
running services.
The keys have the following functions:
Exits the current menu.
When the key is pressed a couple of times, the modifications are discarded
and the initial state will be displayed.
Use these keys to switch between the different menus and/or characters.
Pressing this key executes the configured action.
Starting factory reset
1. Press the Enter key.
2. Press the ▼ key.
The following message will be displayed: All data erased
3. Press the Enter key.
The following message will be displayed: Are you sure?
With the up/down keys you can select Yes (y) or No (n).
4. Press the Enter key to confirm your settings.
The factory reset action is now being started.
Starting rebooting machine:
1. Press the Enter key.
2. Press twice on the ▼ key.
The following message will be displayed: Rebooting
3. Press the Enter key.
The following message will be displayed: Are you sure?
With the up/down keys you can select Yes (y) or No (n).
4. Press the Enter key to confirm your settings.
The reboot machine action will now start.
