UTM 425
Operating Instructions
LCD and Control Keys
The Sophos UTM 425 has an LCD and an operating unit with four membrane
keys. In the LCD, 16 characters per line can be displayed. The display
contains in three cycling views information on the hardware and specific
system states.
After the security appliance has booted
this message is displayed.
UTM version
CPU type and RAM size
CPU load (bar)
OS load (bar)
Uptime
Network load (bar)
With the membrane keys three actions can be executed
Ì
Factory reset:
All settings are reset to the factory settings. The factory
reset function sets all of the configuration settings and options to their
original state. All data entered after the initial installation will be deleted,
including the HTTP proxy cache, the entire email queue, accounting and
reporting data, passwords, and uninstalled Up2Date packages. The version
of the software will not change. That is, all firmware and pattern updates
that have been installed will be retained.
Ì
Reboot machine:
The security appliance is rebooted. The reboot action
will shut down the system completely and reboot.
Ì
Shut down:
The security appliance is shut down. The shut down action
allows you to turn off the system, and allows you to cleanly stop all
running services.
The keys have the following functions
The current menu is left.
When the key is pressed a couple of times, the modifications are discarded
and the initial state will be displayed.
Those keys are used to switch between the different menus and/or
characters.
Pressing executes the configured action.
*** Astaro ***
Security Gateway
ASG ver. 8.000
CPU i686 1001 MB
Busy 27.0%
Load 0.0
10 days 01:43:17
Load 0.0
