UTM 425
Operating Instructions
Starting factory reset
1. Press the Enter key.
2. Press the ▼ key.
The following message will be displayed: All data erased
3. Press the Enter key.
The following message will be displayed: Are you sure?
With the up/down keys you can select Yes (y) or No (n).
4. Press the Enter key to confirm your settings.
The factory reset action will now start.
Starting rebooting machine
1. Press the Enter key.
2. Press twice on the ▼ key.
The following message will be displayed: Rebooting
3. Press the Enter key.
The following message will be displayed: Are you sure?
With the up/down keys you can select Yes (y) or No (n).
4. Press the Enter key to confirm your settings.
The reboot machine action will now start.
Starting shut down
1. Press the Enter key.
2. Press the ▼ key three times.
The following message will be displayed: Shutting down
3. Press the Enter key.
The following message will be displayed: Are you sure?
With the up/down keys you can select Yes (y) or No (n).
4. Press the Enter key to confirm your settings.
The shut down action will now start.
Putting into Operation
Caution:
Risk of explosion if battery is replaced by an incorrect type. Dispose
of used batteries according to the instructions.
Scope of Supply
The supplied parts are indicated in the Hardware Quick Start Guide.
