51
5.アプライアンスを設定する
a) ネットワークの設定を開始する
「ようこそ」
画面の
「クリックして開始」
を選択すると、アプライアンスの基本設定を開始できます。インターフェー
スの IP アドレス、デフォルトゲートウェイ、DNS の設定、日付 / タイムゾーンを、ローカルネットワークと一致する
ように設定してください。
b) アプライアンスを登録する
MySophos でアプライアンスをまだ登録していない場合は、登録画面 (「ファイアウォールの登録)」) が表示され
ます。アプライアンスを MySophos で登録するためには、インターネット接続が必要です。登録を後で行う場合は、
「今は登録しない」をクリックして、セクション c) に進んでください。
ライセンスの別表 (License Schedule) にシリアル番号が記載されている場合は、最初のフィールドにシリアル
番号を入力し、
「既存のシリアル番号がある」をクリックします。シリアル番号がない場合は、
「シリアル番号がな
い (試用を開始)」をクリックします。
既存の UTM/SG アプライアンスからアップグレードし、その UTM ライセンスを新しいファイアウォールに移行す
る場合は、画面上の該当するボタンをクリックして UTM ライセンスを選択し、ファイアウォールにアップロードし
ます。
「続行」
をクリックすると MySophos ポータルにリダイレクトされます。MySophos アカウントを持っている場合
は、
「MySophos へのログイン」
に認証情報を入力します。初めて使用する場合は、
「MySophos に登録する」
に
詳細情報を入力して MySophos アカウントを作成してください。
「続行」をクリックして登録処理を完了します。処理が完了するまで数秒間待ちます。登録が完了すると
「デバイ
スは登録されました」
というメッセージが画面に表示されます。登録が正常に完了した場合にのみ、次の手順と
して
「ライセンスの同期」
を実行できます。
c) ライセンスを同期する
「ライセンスの同期の開始」
をクリックしてサーバーのライセンス情報をアプライアンスと同期させます。同期が
完了すると「サーバーとの同期が成功しました」という内容のメッセージが画面に表示されます。
クイック スタート ガイド
XGS 2100/2300/3100/3300
日本