61
6.设置旁路模式
如果出现电源故障或硬件故障,XGS 设备可以进入 LAN 旁路模式 (硬件旁路模式)。在旁路模式下,防火墙允许
所有数据流在不进行任何扫描的情况下通过。在这种模式下,在此模式下,桥接一对接口,允许不间断的通信
流。
您的XGS设备具有一对旁路端口,如右图所示。
断电后,防火墙会在电源恢复时自动恢复正常功能。如果出现硬件故障,请联系
Sophos 技术支持
。
默认情况下,XGS 设备上的 LAN 旁路模式是禁用的。您可以按以下步骤启用/禁用 LAN 旁路模式。
1. 通过 Telnet 或 SSH 登录 CLI 控制台。
2. 选择“
选项 4.设备控制台
”并按“
Enter
”。
3. 通过执行以下命令查看 LAN 旁路模式状态:
控制台 > 显示 LAN 旁路模式状态
4. 通过执行以下命令启用或禁用旁路模式:
控制台 > 设置旁路 <开/关>
特定端口对的旁路模式启用后,设备前面板上的 LED (请参阅右侧的图片) 将点亮。
请注意:
在初始的 SFOS 版本中,所有旁路端口/对的旁路模式只能同时启用/禁用 (所有可用旁路对的 LED 将
同步开启/关闭)。
分别对每个旁路端口对启用/禁用旁路模式的功能将在未来的 SFOS 版本中添加。请参阅知识库文章
https://community.sophos.com/kb/zh-cn/127014
了解详细信息。
旁路对 1 (端口 1/2)
旁路 LED –
旁路端口 1/2
快速入门指南
XGS 2100/2300/3100/3300
中国