6
XGS 5500/6500
Operating Instructions
LEDs on each SFP+ connector
ACT/LNK
(Left LED)
Green
Solid
1. The SFP+ connector is receiving power.
2. Good connection between the SFP+ port and hub.
Flashing
The adapter is sending or receiving network data.
Off
1. The adapter and switch are not receiving power.
2. No connection between both ends of network.
3. Network drivers have not been loaded
or do not function correctly.
Speed
(Right LED)
Blue
On
If SFP+ connector is operating at 10,000 Mbps.
Amber
On
If SFP+ connector is operating at 1,000 Mbps.
Off
Either the LED is not working or the SFP+ connector
is operating at a speed below 1,000 Mbps.
Back side
Power Supply
Green
Solid
Power
Off
No power
LCD and Control Keys
The XGS 5500/6500 have an LCD and an operating unit with four membrane keys. In the
LCD, 16 characters per line can be displayed.
While the security appliance is booting this message is displayed
Firmware Version
SOPHOS
Protection
Firmware Version
SFOS xx.xx.xx
