9
MAINTENANCE
WARNING!
Do not wash or put fully into water.
Clean the product regularly. Use a cloth with water and soap and dry them carefully.
Check the condition of the sealing rings and the foam rubber inserts before each use. Replace the sealing
rings and the foam rubber inserts 1 time each 6 months or more frequently if it is necessary. Use original
spare parts (Table 3). See Fig B and B1 for how to replace the hygiene kits. Visit www.sordin.com for
ordering information.
Moisture may occur inside the hearing protector muffs if used for long periods. To avoid long term effects
of moisture on the electronic components it is recommended that the acoustic inserts are regularly
removed to allow the muffs to dry, e.g. overnight (Fig B and B1). When removing the cushion and insert
take great care not to touch the electronics board or cables. Changes in position of cables could cause
disturbance in the system. Do not expose the hearing protector to rough handling, which can damage
the electronics.
TRANSPORTATION, STORAGE AND DISPOSAL
Transportation and storage
When the hearing protector is not in use, the headband or neckband should not be extended or the
cushions compressed. Keep the muffs dry and clean and keep them in normal room temperature. Do not
allow the hearing protector to lie in direct sunlight. If the product is to be stored for a longer period it is
recommended that the batteries be removed from the battery holder to prevent damage
NOTICE! If the above recommendations for the hearing protectors are not adhered, the attenuation
values ability could deteriorate considerably.
Disposal
Follow national regulations for disposal of product.
LIMITED TROUBLE SHOOTING/CARE DEVICE
If the electronics cease to function it may be easy to rectify the problem. Please check the following:
• Replace the batteries with new ones.
• Ensure that the batteries are correctly fitted in the hearing protector.
• Ensure that the battery plates make good contact with the batteries.
• Ensure that the battery plates have not become coated with verdigris.
If these measures do not help, consult the point of sale.
ACCESSORIES
Approved sizes (Supreme MIL CC-1/AUX-1 and Supreme MIL CC-3/AUX-3)
Over-the-head earmuff size ranges: Small-Medium-Large.
Approved sizes (Supreme MIL CC-4/AUX-4)
Over-the-head earmuff size ranges: Small.
Approved helmets (Supreme MIL CC-2/AUX-2)
These earmuffs shall be fitted to, and used only with, the industrial safety helmets as listed in Table 2.
Adapter type number is marked on the adapter. For an updated list of approved helmet combinations,
visit www.sordin.com.
WARNING!
Helmet mounted hearing protectors complying with EN 352-3 are of ‘medium size range’ or ‘small size
range’ or ‘large size range’. ‘Medium size range’ helmet mounted hearing protectors will fit the majority
of wearers. ‘Small size range’ or ‘large size range’ helmet mounted hearing protectors are designed to fit
wearers for whom ‘medium size range’ helmet mounted earmuffs are not suitable.
Summary of Contents for SUPREME MIL AUX
Page 1: ...SUPREME MIL CC SUPREME MIL AUX...
Page 2: ...2 A C E E1 E2 B B1 D...
Page 3: ...3 F G H G1 F2 F3 F1 G2...
Page 140: ...WWW SORDIN COM PM289 00...
