Operation
1.12. - Connect data logger to internet
1. Connect data logger to router via ethernet cable (See. 1.10.).
If your router is set as DHCP Server, the router automatically generates
an IP address to the data logger. Check the manual for your router for help.
2. Connect data logger to controller by CAN bus cable. After that the data logger can be configured via the
controller menu.
Example:
MAC address is 02-50-C2-DB-7F-FF
-> DB7FFF (without “-“) is the nabto
address of the data logger
Data logger
Controllermenu
Router
Data logger
Ethernet-Kabel
(5)
3. Search for the MAC address of the data
logger, you will find it either on the bottom
of the datalogger or in the controller menu
>Special function > Networking
> Ethernet.
4. Enter address of your data logger in browser or app
General format is XXXXXX.sorel-connect.net
Replace XXXXXX with the 6 digit code from the MAC
address as described in 3.
b) Sign in with your login data.
c) In your Nabto app or in your browser, you now get
an „Access denied“ message and your username will be
displayed in the controller menu as described under 4.
(see above).
Make sure that you enter the 6 digit
code without “-“!
Example:
DB7FFF.sorel-connect.net
If the required user does not appear in the controller menu, repeat the connection attempt in your
browser or app by pressing the refresh button.
