3
1.1 EC declaration of conformity
By affixing the CE mark to the unit the manufacturer declares that the TDC 2
conforms to the following relevant safety regulations:
-
EC low voltage directive
73/23/EEC, as amended by 93/68/EEC
-
EC electromagnetic compatibility directive
89/336/EEC version 92/31/EEC version 93/68/EEC
Conformity has been verified and the corresponding documentation and
the EC declaration of conformity are kept on file by the manufacturer.
1.2 General instructionsIt is essential that you read this!
These installation and operating instructions contain basic instructions and
important information regarding safety, installation, commissioning,
maintenance and the optimal use of the unit. Therefore these instructions
must be read completely and understood by the installation technician/
specialist and by the system user before installation, commissioning and
operation of the unit.
The valid accident prevention regulations, VDE regulations, the regulations
of the local power utility, the applicable DIN-EN standards and the installation
and operating instruction of the additional system components must also
be observed. The controller does not under any circumstances replace
any safety devices to be provided by the customer!
Installation, electrical connection, commissioning and maintenance of the
unit may only be carried out by specialists who possess the appropriate
training.
For the user: Make sure that the specialist gives you detailed information
on the function and operation of the controller. Always keep these
instructions in the vicinity of the controller.
1.3 Explanation of symbols
Failure to observe these instructions can result in danger to life
from electric voltage.
Danger
Danger
Failure to observe these instructions can result in serious damage
to health such as scalding, or even life-threatening injuries.
Caution
Failure to observe these instructions can result in destruction of
the unit or the system, or damage to the environment.
Caution
Information which is especially important for the function and op-
timal use of the unit and the system.
Safety instructions
1
1
Summary of Contents for TDC 2
Page 35: ...35 Notes...
