Sorensen MML Series Operation and Programming Manual
2-2
Figure 2-1 Installing Modules in the Electronic Load
WARNING!
If the Mainframe is not installed with all modules, the empty module position
must be installed with the panel cover (Sorensen part no. 5361527-06) for safety
and airflow.
2.3.1 Channel Number
The channel number of a specific Load is determined by the location of that module in
relation to the farthest left side of Mainframe. Because some Load (MML-80-20-102)
has two channels in one module, channel 1 and 2 are always on the farthest left slot of
the Mainframe, and channel 7 and 8 on the farthest right. The channel number is fixed
for Mainframe even Load module is empty. Figure 2-2 shows the channel
assignments for a Sorensen MML-4 Mainframe containing two Loads of
MML-80-60-301 single channel/module, and two Loads of MML-80-20-102 double
channel/module. Channel number is automatically assigned to each channel: 1, 3, 5,
6, 7, 8. At this moment, channels 2 and 4 are empty. MML-2 Mainframe has only
four channels (1, 2, 3, 4).
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com