Sorensen MML Series Operation and Programming Manual
4-2
Figure 4-1 Front Panel of Mainframe
c
Power Switch
. Turns the AC power on and off.
d
LCD Display
.
Displays channel information.
e
Channel Indicator
.
Indicates the active channel settings.
f
Function keys:
CHAN
. To select a channel for settings.
MODE
. To select a mode for settings.
PROG
. To select a program for settings or running.
CLEAR
. To clear the digit entered from keypad. This key allows you to change
incorrect digits before they are entered.
RECALL
. To recall the saved settings from EEPROM, and all channels’ settings
from specified files (1 to 101). Recalling file 101 means to recall the factory
default settings. Recalling program is from PROG, number 1 to 10.
SAVE
. To save all of the present mode settings of all channels in the specified
files (1 to 100). Saving program is from 1 to 10. Saving DEFAULT is to save the
status of all channels for the next time the electronic Load is turned on. All saved
settings are stored in EEPROM, and will not be lost when ac power is cycled.
SPEC
. To select specification data for editing, or to enable SPEC function.
CONF
. To select configuration data for editing.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com