Instructions of use Boogie Drive
9 of 32
2019-08-15
2 General information
-10 to + 41°C
30 - 70%
2.3 General safety information
Before each use, check:
•
that all truss pads are firmly in place,
• the frame, add-on parts and accessories for visible damage, bending,
• cracks or missing or loose screws,
•
the wheels and quick-release axles for tightness,
•
that the inflation pressure and tyre tread are sufficient,
• that the brakes are working properly,
•
that the locking mechanisms (springs, quick-release axles, eccentric clamps, etc.) are
tight,
•
that all previously dismantled components have been reconnected and firmly locked.
There is a risk of injury (e.g. due to crushing) from all rotating, swivelling or foldable
components, even during adjustment and repair work and during transport.
Structural modifications may only be carried out with our explicit approval and only by the
specialist dealer. These must be documented.
The occupant must not be left in the aid unattended.
The standing trainer must only be used if all components are correctly fitted and adjusted.
If the standing trainer is used in an area without thresholds, the wheels should be adjusted in
such a way that each wheel maintains ground contact. In the case of frequent crossing of e.g.
door thresholds or the like, the front wheel should not be in contact with the ground.
