18 of 28
Service Record Boogie Fix and Swing
2019-08-12
3.7 Assembly Group Pelvis truss pad
Before using the standing aid for the first time, the breast pelottes must be largely adjus
-
ted to the individual measurements of the user. If the user stands in the standing aid, only fine
adjustments may be made.
(1)
To adjust the height:
• Loosen the threaded pin
(A),
• telescope the entire support of the
chest pad
(B)
into the desired position
and
• Turn the threaded pin
(A)
tight again.
(2)
and / or:
• Remove both screws
(B)
,
• move the chest pad into the alternative
holes and
• retighten the screws
(B)
.
(2)
To adjust the depth:
Loosen the screw
(A)
,
push the chest pad into the desired position
and tighten the screw
(A)
again.
(1)
To adjust the inclination:
Release the clamping lever
(C)
,
bring the chest pad
(D)
to the desired angle
and
retighten the clamping lever
(C)
.
3.7.1 Pelvis truss pad
(A)
(B)
(1)
(2)
(B)
(A)
(C)
(D)
3.7.2 Side pelvis truss pad
(3)
To adjust the height:
• Remove the screws
(B)
,
• place the holder of the lateral chest
pads in the alternative holes and
• retighten the screws
(B)
.
(4)
To adjust the width:
• Loosen the setscrews
(A)
on both sides,
• Bring the side chest pads
(B)
to the
desired distance and
• tighten the set screws
(A)
again
(4)
(A)
(C)
(B)
(3) (B)
(A)
