Instructions of use Dynamis TSD
15 of 36
2021-05-26
3.3 Handling the seat and back
3.3.1 General information on the back
3.3.2 Dynamic back
In the case of seat tilts from a setting of> 90 °, it is essential to activate the anti-tipper.
The head must be supported during tilting (e.g. by a headrest).
Activate the seat tilt only when the vehicle is stationary with the brakes activated.
Check all components for correct function after every change to the back.
Please have the spring damping adjusted by a specialist retailer (see service booklet)
2x
2x
(2)
2x
2x
(1)
Locking (unlocking: proceed in reverse order):
3.3.3 Setting the rebound speed