Instructions of use Dynamis TSD
31 of 36
2021-05-26
4 Repairs / maintenance / re-use
For safety reasons and to maintain product liability, an inspection by your specialist retailer is re-
quired at least once a year. This must be carried out and documented according to the checklist
on the following page.
4.9 Maintenance / inspection
4.6 Lifespan
The expected normal lifespan, depending on the intensity of use and the number of re-uses, is
5 years. For this purpose, the product must be used for its intended purpose and intended use,
the specifications in the instructions for use must be followed and all maintenance and service
intervals must be observed.
The product can be used beyond this period if it is in a safe condition. This usual, theoretical
service life is not a guaranteed service life and is subject to a case-by-case examination by the
specialist retailer, as is the reusability.
Use beyond the specified service life leads to an increase in the residual risks and should only be
carried out after careful, qualified consideration by the operator.
The service life can also be shortened depending on the frequency of use, the operating envi-
ronment and the care.
The usual service life does not refer to wearing parts such as textile parts, wheels and plastic
parts that are subject to material-specific aging and / or wear.
This specified service life does not constitute an additional warranty or guarantee.
The wheelchair may only be disposed of with the approval of the sponsor. It must be disposed
of in accordance with the applicable national statutory provisions.
4.8 Disposal
4.7 Re-use
Before re-use, a complete inspection according to the checklist must be carried out by a qua-
lified specialist retailer. All disinfection measures for re-use must be carried out according to a
validated hygiene plan in order to ensure the transfer of a low-germ product.
