sNI-1G
installation guide
Rev1.1
Precaution
Please read these instructions carefully before use.
Do not attempt to disassemble or modify the product.
Keep the product away from external shocks or vibrations.
Do not use damaged or peeled cables.
Do not use the unit outdoors.
Product specifications and features are subject to change without notice.
Warranty Information
Free warranty service
In the case that a defect is found which is caused by a design or the production flaw while using the device properly, the manufacturer is
responsible for the faulty product. There is free warranty service for 1 year from the date of purchase.
Even during the warranty service period, malfunction or damage of products caused by inevitable incidents such as a natural disaster is not
subject to the free warranty service.
Charged Warranty service
The free warranty service period is expired.
Malfunction of the product is caused by the user.
Malfunction of the product is caused by incidents.
Malfunction of the product is caused by a natural disaster such as an earthquake, flood, lightning, etc.
In the case of a charged warranty service, the customer should cover the shipping costs.
Examples of a user caused malfunction
Attempts to disassemble or modify the device.
Not following the instructions in this manual.
Please read these operating instructions and the Q&A board on our website carefully before asking for the warranty service.
Supplied Components
sNI-1G with slim size bracket
Standard size bracket
M.2 interface board(B&M key or A&E key)
USB type C cable
sNI-1G installation guide
Specifications
PCI express Ethernet chip set
-
Supports PCI express 1.1 or higher
-
Supports 10/100/1000M, Giga Lite(500M) mode
-
Supports Always On Always Connected
-
Clock-less Wake-On-LAN
-
Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
-
Supports IEEE 802.1P layer 2 Priority Encoding
-
Supports IEEE 802.1Q VLAN tagging
-
Supports IEEE 802.3az-2010(EEE)
-
Supports Full Duplex flow control(IEEE 802.3x)
Internal power input
-
Input power: +12.0V(+0.5V, -0.5V), 1A max
-
15pin SATA power connector
Internal standby power input
-
Input power: +6.0V to +12V, 0.5A max
-
2pin connector
External power input
-
Input voltage: +6.5V ~ +12Vdc
-
Input current: 1A max
-
5.5mm OD, 2.1mm ID DC adaptor jack
-
2 pin header connectors for connecting external power to
other internal devices
Display LED
-
Active(Green), 100M(Yellow), 1000M(Amber)
-
LED On - Off jumper for reducing noise
Designed for high end network audio
-
Separate Ethernet transformer and common mode filter for
each signal line for best noise immunity performance
-
Ethernet noise filter down to audio band.
-
Filtered and buffered M.2 signal interface between PC
motherboard for blocking noise from mother board
Operating environment
-
Operating temperature: 0 ~ 40℃
-
Storage temperature: -10 ~ +50℃
-
Operating & storage humidity: 10% ~ 90%
OS support
-
Windows 7 or higher version, Linux
The formal operating instruction and Windows OS device
driver are available through sNI-1G product page,
www.sotm-audio.com.
Ultimate High Performance Audio
www.sotm-audio.com
