10
• The lower mechanism retaining foam can be slid free (Fig2)
• Looking at the play area of the Jukebox (shown in Fig4) - Carefully remove
the transit plate retaining screws with a suitable screwdriver. The transit
plate is now able to be lifted from the playing platter and tone arm. It is
important to remove the plate by lifting directly UP so as not to damage
the tone arm. The plate should be kept safe for use if the jukebox is to be
moved in the future.
• Remove the retaining foam from under the tone arm.
• Switch the Jukebox on using the power switch on the rear of the Jukebox
denoted in FIG 1. The Jukebox will illuminate. Transit will show on the front
display denoting that the Jukebox is in Transit mode.
• Press the white RESET button on the back of the Jukebox. (FIG 1) to exit
transit mode. The mechanism will return to its home position with the LP
changer arm at the top.
• Remove the clear plastic stylus cover (shown in FIG 4) by sliding it towards
you.
• The Jukebox is now ready to play.
FIG4. LP Mechanism playing area
Retaining
foam
Tone
arm
Speed and
load buttons
Transit
plate
Transit plate
retaining screws
Stylus cover
(slide forward towards you to remove)
Summary of Contents for SL33
Page 1: ...SL33 Vinyl Jukebox User Manual Series 3 Unity Build 7 0 ...
Page 33: ...33 ...
Page 34: ...34 ...
Page 35: ...35 ...