12
Inserting title cards
Title Cards
Perforated blank title cards and Sound Leisure’s Label Magic printing software
are included in your Jukebox welcome pack. For further details on installing
your software and your FREE 12 month subscription code please see the
postcard included in the welcome pack or visit :
soundleisure.com/classic-Jukeboxes/accessories/label-magic-title-card-software
This will assist you in designing and printing title cards. Additional cards are
available to purchase through our website.
soundleisure.com/classic-jukeboxes/accessories/title-card-labels-45rpm-vinyl
The title cards start at selection no. 100 and finish at 169.
How to remove the title rack mechanism
• Unlock and open the jukebox door. On the inner side of the door you will
find the title rack holder.
• Gently release the wiring from the title rack wiring clips shown in Fig5
• Unscrew and remove the retaining screws denoted in Fig5. It is advisable to
support the title rack as the screws are loosened.
• Unclip the title rack cable from the title rack wiring clips and remove the title
rack from the Jukebox as shown in the lower image of Fig5, allowing the
cable to trail.
• The mechanism can now be supported on a chair or the floor.
• Insert the title cards into the retaining clips of each page of the mechanism.
• To move to the next page use the title rack “flip”button as located in Fig5.
DO NOT ROTATE THE TITLE RACK BY HAND AS THIS CAN
DAMAGE THE TITLE RACK MECHANISM.
• Once all the title cards are inserted, replace the mechanism back into the
Jukebox, securing into place using the retaining screws. Then ensure all
cables are neatly replaced in the wiring clips.
Summary of Contents for SL33
Page 1: ...SL33 Vinyl Jukebox User Manual Series 3 Unity Build 7 0 ...
Page 33: ...33 ...
Page 34: ...34 ...
Page 35: ...35 ...