9.0 Adjusting
amplifier setup
The amplifier EQ has been
pre-set to match the speaker
arrangement, however
should you wish to adjust
the sound equalisation, Bass,
Mid and Treble controls are
provided on the rear of the
cabinet (shown right.)
Turn
any control Clockwise to
increase and anti-clockwise to decrease the required EQ.
10.0
External Speakers
The Sound Leisure D1 Digital Amplifier is configured as a stereo 30w setup. The
internal single cabinet speaker provides a central stereo image only, so 2 additional
outputs (left and right) are provided for the connection of external speakers for a
full stereo image.
10.1 To connect external speakers
On the rear of the jukebox cabinet locate the 2x speaker connection pads (shown
right)
Connect a 2 core speaker cable to
each of the speaker connection
pads, ensuring the positive (+) cable
is connected to the red terminal on
each speaker connection pad.
Run the speaker cable to the
location of the external speakers
and connect the speaker cable, also
ensuring the positive (+) cable is
correctly connected to each
speaker.
Summary of Contents for VINYL POP
