3.0 Initial Setup
3.0.1
Positioned the jukebox in its intended position. The mains lead supplied
with the jukebox is 2m long so please ensure the unit is positioned within
2m of a main outlet.
3.0.2
Remove the clear Perspex lid from the jukebox by lifting straight upwards
using the handles on the left and right side. Place this safely to one side.
With the vinyl jukebox mechanism now revealed:
3.0.3
Locate the 4x M6x70mm ‘transit’ bolts positioned at each corner of the
silver mechanism metal framework. The bolts from the left side of the
mechanism are highlighted in the image below, with 2 other bolts also on
located on the right side of the mechanism
a.
The ‘transit bolts’ hold the mechanism firmly in place during transit for
safety, but should be removed when the player is in its selected
location.
b.
To remove the ‘transit bolts’ use a 10mm spanner to release the bolts
and remove these completely from the vinyl mechanism framework.
PLEASE NOTE: The ‘transit’ bolts should be retained and secured back in
place prior to the moving the jukebox at any point in the future.
Summary of Contents for VINYL POP
