background image

3

2

PICK YOUR SOUND

•  Press the

 

fan sounds

 

button (left side) to play fan 

sounds. Press it again to play the next fan sound.

•  Press the white noises button (right side) to play 

white noise sounds. Press it again to play the next 
white noise.

To signal a return to the fi rst fan sound or white noise 
you will hear a short rising tone (“whoop” sound).

LectroFan will remember the last noise and fan setting 
that you made when changing modes. This way you can 
easily switch back and forth between your favorite fan 
sound and your favorite white noise.

Note: 

All settings are saved when the LectroFan is 

turned off  using the power button, but not saved 
if the unit is simply unplugged.

TIMER

Turning on your LectroFan results in continuous play, until the timer 
is turned on. The timer sets the unit to play for a minimum of one hour 
and then gradually shut off . The LectroFan will create a short “dip” 
in the sound when you press the timer button so you’ll know for sure 
you have pressed it.

Power-on Default

If you don’t want the LectroFan to turn on immediately when 
you fi rst plug it in, you can disable that function with this procedure:
1.  Turn off  the LectroFan with the power button
2.  Press and hold down the volume down button while pressing and releasing the power button.
3  Turn off  the LectroFan. To enable this function again, restore the factory settings as covered below.

Restoring Factory Settings

Turn off  the LectroFan. Press and hold the power button down until it makes a short rising tone (“whoop” sound). 
Your LectroFan has now been reset to its original factory defaults. After performing the reset, the default fan sound 
is set to “Large Fan” and the default noise is set to “Brown”. The default is set to “Fan Mode,” the volume is set 
to a comfortable level, and the LectroFan is set to turn on immediately when it’s fi rst plugged in.

Using an External Timer or Power Strip

If you use a switched power strip or your own external timer to supply power to your LectroFan, be sure to switch 
the LectroFan off  and then back on using the power button when you change your settings—only then will the 
LectroFan remember them.

Timer

Button

POWER

on/off

60 min

Note: 

The timer can be set to 

60 minutes by pressing the 
timer button once. Press the 
timer button additional times 
to add 60 minutes to the time 
you would like LectroFan to play.

NOISES

Lowest Pitch White Noise

Brown

Chestnut

Cinnamon

Tan

Amber
Cream

Pink

Coral

Champagne

Pure White

Highest Pitch White Noise

Step through 

the 10 Fan Sounds 

Step through 

the White Noises 

FAN

SOUNDS

WHITE

NOISES

FAN SOUNDS

1  Large Fan
2  Industrial Fan
3  Mellow Fan—LO
4  Mellow Fan—HI
5  Exhaust Fan
6  Attic Fan
7  Circular Fan
8  Vent Fan
9  Box Fan
10  Oscillating Fan

Summary of Contents for LectroFan










Reviews: