SoundQubed amplifiers are recommended to use 12 gauge or thicker speaker connecting cables.
Run 12 gauge speaker connecting cables from your speakers to SoundQubed amplifiers’ mounting location.
Keep speaker cables away from power cables and SoundQubed amplifiers’ input cables.
Use grommets anywhere the cables have to pass through the holes in the metal frame or sheet metal.
Connect to the speakers according to the type of the terminals on each speaker.
Strip 3/8" of insulation from the end of each cable and twist the cables strands together tightly.
Make sure there insulation from the end of each cable and twist the cables together tightly.
Make sure there are no stray strands that might touch other cables or terminals and cause a short circuit.
Crimp spade lugs over the cable ends or tin the ends with solder to provide a secure termination
Connect the cable ends to SoundQubed amplifiers as speaker system diagram.
DIGITAL MONOBLOCK’S SPEAKER CONNECTIONS
DIGITAL MONOBLOCK’S SPEAKER CONNECTION DIAGRAM
8 ~ 2 ohms
4 ~ 1 ohms
8 ~ 2 ohms
