3
Precautions
8
Installation
1
Using self-tapping screws to attach mounting plate to
the selected position in your vehicle.
2
Install the housing onto the mounting plate the four
screws supplied.
Do not install this product so that the screen can be seen by
the driver.
Do not install this product so that any part of the product blocks
the driver's view.
Always play the audio at moderate levels.
Never attempt to operate this product while driving.
Do not attempt to repair the unit or to open the housing.
Do not drop or strike the monitor housing or screen.
Do not watch the monitor for long periods when the engine is
off, as this may cause the vehicle battery to discharge.
Do not attempt to recharge the battery in the remote control.
Keep the remote control away from children.
Use on only a soft cloth with non-ammonia glass cleaner to
clean the screen.
1. The installed temperature range for this monitor is
2. The range of temperatures in which the monitor can be USED is smaller, from 32
(0
If this occurs, wait until the temperature enters the correct range and the screen
will return to normal.
3. For best viewing, you should be no more than 45 to the right or left side and at approximately
eye level.
-4 to 158 F (-20
to 70
).
to 104 F
to 40
).
(Visual Angle)
20
40
45 45
A mobile video system in a vehicle may distract the
driver, so please observe the following precautions.
Notes on using this monitor
Summary of Contents for S10.4FI
Page 1: ......
